HMC responding slowly to REST API calls Typically, REST API calls to the HMC should be answered within ms up to a few seconds (depending on the amount of data that is requested by the command). If the execution of those calls takes much longer resulting in unacceptably increasing performance scan durations, the problem might be caused by a bug in the IBM HMC. | No Format |
|---|
2023-06-30T12:07:51,354 INFO [performance-scan_Worker-7]: Execution of command [ScanPowerVmPerformanceData] took [1204342]ms [HMC_xxx] [PerfScan] (RawCommandExecutorImpl) |
BVQ Version: any Suggested Action: Upgrade the HMC to V10R2 M1040 or higher + iFix MF71107. Important: Upgrading to this level will only resolve the issue if performance collection on the HMC was disabled prior to the upgrade. Otherwise one of the following two methods is required: - Reinstall the HMC
- Request the pesh password from IBM and reset Postgress DB on the HMC. Note: An IBM maintenance contract is required to get the pesh password:
| No Format |
|---|
### Postgres DB reset after V10R2M1031 installation
# Just for a better feeling ;-)
hmcshutdown -t now -r
# As hscroot, if possible save PCM data
saveupgdata -r disksftp -h <IP> -u <USER> -d <Directory> -i perfmon[,netcfg] --migrate
# As hscpe
pesh <HMC_Serial>
and then enter the "password of the day"
su -
#Insert root password, you can change it before, as hscroot do a chhmcusr -u root -t passwd
# yes twice! This resets the postgres DB - all PCM data will be lost
/opt/hsc/bin/hscSignal 511
/opt/hsc/bin/hscSignal 511
exit
hmcshutdown -t now -r
# Once again, it's another bug :-(
pesh <HMC_Serial>
and then enter the "password of the day"
su -
/opt/hsc/bin/hscSignal 511
/opt/hsc/bin/hscSignal 511
exit
hmcshutdown -t now -r
# After reboot, enable PCM data collection again
# Not tested yet, restore PCM data
rstupgdata -r sftp -h <IP> -u <USER> -d <Directory> --migrate
|
Error Message: HTTP-Error 500 "Unable to connect to Database" during topo scan | No Format |
|---|
2021-04-08T09:17:37,383 ERROR [topology-scan_Worker-1]: Error executing call to [/rest/api/uom/ManagedSystem/<system_id>/<object_type>], got status [500 INTERNAL_SERVER_ERROR] with message [
<entry xmlns="http://www.w3.org/2005/Atom" xmlns:ns2="http://a9.com/-/spec/opensearch/1.1/" xmlns:ns3="http://www.w3.org/1999/xhtml">
<id>5fc9dc1c-03be-4e80-b8fb-4f9ea9dc0b4a</id>
<title>HttpErrorResponse</title>
<published>2021-04-08T09:17:46.640+02:00</published>
<author>
<name>IBM Power Systems Management Console</name>
</author>
<content type="application/vnd.ibm.powervm.web+xml; type=HttpErrorResponse">
<HttpErrorResponse:HttpErrorResponse xmlns:HttpErrorResponse="http://www.ibm.com/xmlns/systems/power/firmware/web/mc/2012_10/" xmlns="http://www.ibm.com/xmlns/systems/power/firmware/web/mc/2012_10/" xmlns:ns2="http://www.w3.org/XML/1998/namespace/k2" schemaVersion="V1_0">
<Metadata>
<Atom/>
</Metadata>
<HTTPStatus kb="ROR" kxe="false">500</HTTPStatus>
<RequestURI kxe="false" kb="ROR">/rest/api/uom/ManagedSystem/3870ebf9-dd78-31e5-a91e-719c4f86178b/NetworkBridge</RequestURI>
<ReasonCode kb="ROR" kxe="false">Unknown internal error.</ReasonCode>
<Message kb="ROO" kxe="false">com.ibm.pmc.rest.provider.exceptions.RESTProviderException: Exception While getting SEA:: Unable to connect to Database. </Message>
<RequestBody kb="ROO" kxe="false"/>
<RequestHeaders kxe="false" kb="ROO">
{x-forwarded-server=hmc101.localdomain, x-forwarded-host=172.16.146.192:12443, X-Transaction-ID=XT10011179, host=172.16.146.192:12443, connection=Keep-Alive, x-api-session=9PLm73Uh1Zg84V-wivc1TrsRpNLdrV-VbWeDWSfBEheHxNiuwGEgl_0OWwcLpFlVDaydA2z37DWTvHLMo9McsEwN9X_at8GfE5_ayfeF9Qjzf2EGlzYxJW0G4BzEaznehGmjRR7GfsY3ktUmcte6LT_-JHq5tCqUzfx4nVz6E9wu4dbG2Bo-DhJnkH81b1HLqpjCZyPQlAHf1fqpFOFWr29_7xq-GN_J5tiE1zwSXvY=, x-forwarded-for=172.16.168.84, accept-encoding=gzip,deflate, accept=application/vnd.ibm.powervm.uom+xml;, user-agent=Apache-HttpClient/4.5.12 (Java/11)}
</RequestHeaders>
</HttpErrorResponse:HttpErrorResponse>
</content>
</entry>
] (PowerVmClient) |
BVQ Version: 2021.H1.3 and above Suggested Action: The Postgres DB on VIO servers which the HMC queries to get various system information (like virtual networks, virtual storage, etc.) is broken or Postgres service (vio daemon) is not running. This causes HTTP-500 error messages on both, the HMC and BVQ scanner. The issue can be fixed using the following commands on the VIOS: | No Format |
|---|
ssh padmin@${vios}
$ oem_setup_env
# stopsrc -s vio_daemon
# /usr/sbin/slibclean
# rm -rf /home/ios/CM
# startsrc -s vio_daemon -a '-d 4' |
Error Message: HTTP-Error 500 "Exception while getting SEA" during topo scan | No Format |
|---|
2021-05-18T19:33:27,290 ERROR [topology-scan_Worker-6]: Error executing call to [/rest/api/uom/ManagedSystem/b8f44367-98bd-377d-8227-7db6208f1c4c/NetworkBridge], got status [500 INTERNAL_SERVER_ERROR] with message [
<entry xmlns="http://www.w3.org/2005/Atom" xmlns:ns2="http://a9.com/-/spec/opensearch/1.1/" xmlns:ns3="http://www.w3.org/1999/xhtml">
<id>7af9ea16-352a-4ab1-890f-1e24405102e7</id>
<title>HttpErrorResponse</title>
<published>2021-05-18T19:33:27.285+02:00</published>
<author>
<name>IBM Power Systems Management Console</name>
</author>
<content type="application/vnd.ibm.powervm.web+xml; type=HttpErrorResponse">
<HttpErrorResponse:HttpErrorResponse xmlns:HttpErrorResponse="http://www.ibm.com/xmlns/systems/power/firmware/web/mc/2012_10/" xmlns="http://www.ibm.com/xmlns/systems/power/firmware/web/mc/2012_10/" xmlns:ns2="http://www.w3.org/XML/1998/namespace/k2" schemaVersion="V1_0">
<Metadata>
<Atom/>
</Metadata>
<HTTPStatus kxe="false" kb="ROR">500</HTTPStatus>
<RequestURI kb="ROR" kxe="false">/rest/api/uom/ManagedSystem/b8f44367-98bd-377d-8227-7db6208f1c4c/NetworkBridge</RequestURI>
<ReasonCode kb="ROR" kxe="false">Unknown internal error.</ReasonCode>
<Message kb="ROO" kxe="false">com.ibm.pmc.rest.provider.exceptions.RESTProviderException: Exception While getting SEA:: The system is currently too busy to complete the specified request. Please retry the operation at a later time. If the operation continues to fail, check the error log to see if the filesystem is full. </Message>
<RequestBody kb="ROO" kxe="false"/>
<RequestHeaders kxe="false" kb="ROO">{x-forwarded-server=hmc3.labwi.sva.de, x-forwarded-host=hmc3.labwi.sva.de:12443, X-Transaction-ID=XT11438532, host=hmc3.labwi.sva.de:12443, connection=Keep-Alive, x-api-session=xnqKwOuPE9APo0rubodXReDeoXN2SnlAXIeEzEu4guge1pd6sg4oCF0WlAE94qpB7NjiX5q8L5xHLJMUuS4LWqRvxopaTucnrOqa6TACGCWhAMYJ4DekkrJtxlpM_s0GkNkoerZ5JSvutYojiYro9N2TNortma44FydeyORKQF260PAUjI2SLytd10mS8PJTpb9uzkbo6h0P0quXOSqRXg==, x-forwarded-for=10.10.120.73, accept-encoding=gzip,deflate, accept=application/vnd.ibm.powervm.uom+xml;, user-agent=Apache-HttpClient/4.5.12 (Java/11)}</RequestHeaders>
</HttpErrorResponse:HttpErrorResponse>
</content>
</entry>
] (PowerVmClient)
|
BVQ Version: 2021.H1.3 and above Suggested Action: Different problems can result in this error. One reason might be a full filesystem (as the error message itself suggests). Another reason might be a dodgy SEA adapter. Please run command | No Format |
|---|
entstat -all entX |
to see if there are Limbo Packets which indicate that the SEA has detected its physical network is not operational.
Error Message: "ObjectNotValidException" during topo persist | No Format |
|---|
2021-07-19T15:43:45,609 ERROR [persistExecutor_3]: Error during command execution: Error during powervm topology persist execution! [TopoPersist] (AbstractCommandExecutor)
de.sva.bvq.data.grid.api.exception.ObjectNotValidException: Create operation not valid for object of type [pvm_physical_volume_to_virtual_io_server]! pvm_physical_volume_location_code: [[[pvm_physical_volume_location_code] must not be null!][[pvm_physical_volume_location_code] is primary key (not auto generated) and must be set!]] |
BVQ Version: 2021.H1.3 and above Suggested Action: Information provided by AIX and sent via REST do not match (In this case it was an hdisk which looked fine from AIX point of view but reported no location code when queried via REST API). Root cause is not understood but rebooting the VIOS servers - one after the other - probably fixes the issue.
Error Message: "NullPointerException" during topo persist | No Format |
|---|
2022-03-17T11:34:01,746 ERROR [PersistExecutor_1]: Error during command execution [TopoPersist] (BaseJobExecutor) java.lang.NullPointerException: null
at de.sva.bvq.persister.powervm.commands.PersistVirtualNetworkBridgeCommand.executeCommand(PersistVirtualNetworkBridgeCommand.java:53) ~[bvq-powervm-persist-2021.H2.9.jar!/:?] |
BVQ Version: 2021.H1.3 and above Suggested Action: This problem can be caused by a corrupt CMDB on a VIO server. There is a script available from IBM to clean up the CMDB which probably fixes the issue. |