Notes
Please note
Starting with version 3.0 the upgrade from DB2 to version 10.5 FP2 is mandatory.
Please download first this DB2 version from the IBM website and then perform the upgrade. For instructions, please see the following document: DB2 upgrade from version 9.7.4 or higher to 10.5.
Highlights
Bugfix release
Improvements
Issue ID | Module | Description |
---|---|---|
BVQ-8411 | GUI | Cluster selection dialog: show SVC code level and modify default sorting |
Bug fixes
Critical
Issue ID | Module | Description |
---|---|---|
BVQ-8459 | DB schema migration | Migscript 3.3.0.20 for table PERF_SVC_NODE_PORT sometimes fails This means that no node port stats are recognized anymore and the directory BVQ-scanner/iostat/instanceX/error is filled up. |
BVQ-8460 | DB schema migration | Some run-time errors during the execution of mig scripts in DB2CMD are ignored. |
Important
Issue ID | Module | Description |
---|---|---|
BVQ-8392 | GUI | Treemap search: several selected objects from different levels lead to an exception |
BVQ-8413 | GUI | JDBC connection timeouts during slow connections |
BVQ-8415 | GUI | Performance view: node CPU core metric tooltip doesn't show core ID |
Recommended
Issue ID | Module | Description |
---|---|---|
BVQ-8410 | GUI | Performance view: show VDisk & VDiskCopy cannot be opened with IO group |
BVQ-8418 | GUI | Performance view: Node2Node: inconsistent tab name und perf-view options window title |
Known problems
Issue ID | Module | Description |
---|---|---|
IBM PMR 91765,033,724 | SVC 6.2.0.3 | Severe impairment of the VDisk latency by the SVC CLI command 'lsmdiskextent'. Seen at a cluster with 8 nodes (8G4) under 6.1.0.4. Starting with BVQ 2.4.3 this command is not used anymore. Instead command 'Isvdiskextent' is used. |
IBM PMR unknown | SVC 6.4.0.3 | Massive accumulation of reaching the SVC limit of 10 simultaneously competitive SSH sessions can trigger a warm restart of the node. |
BVQ-6610 | BVQ VMware | Multiple mappings of a VM virtual disk (and/or of different snapshot versions of a single VM) to a VM virtual machine are not supported yet. This happens for example with flash copy managers like TSM4VE. |
BVQ-6623 | BVQ VMware | Scan and representation snapshots and thier capacities are not yet supported by BVQ. The 'Used Capacity' of a VM Virtual Disk corresponds currently to the 'Used Capacity' of the original VMDK file |
IBM PMR ? | SVC performance stats | Starting with version 6.1.0.1 SLAV, PLAV and DLAV refer to the consolidated backend IO sizes of up to 256k. But not the IO-counter for CTRM and CTP, which means that their quotient may be too low by a factor of 8. Therefore, the VDisk below cache metrics SLAV and PLAV cannot be used directly to assess the backend latencies. Also their transaction size is not the same of the backend (max 32k). However, CTD was adapted to the consolidated IO sizes and provides continuously useful values. |
IBM PMR ? | SVC 7.3 performance stats | Legacy VDisk cache statistics corrupted |
IBM PMR ? | SVC 7.3 performance stats | Node CPU Core stats =0 |
IBM defect 197194 | SVC 7.3 Performance Stats | CPT, OPT, APT much too high |
DB schema changes
Version | Tables | Description |
---|---|---|
3.3.0.20 | PERF_SVC_NODE_PORT | Improved order of the RENAME TABLE in the script for BVQ-8459 |
Requirements and restrictions
Requirements of the HW/SW environment | Please see supported environments since BVQ 3.0 |
---|---|
Minimum BVQ version required for an update | V2.7 |
DB2 version | DB2 Express V10.5 FP4 |
Java Runtime minimum version | 1.7.0.71 (Java 1.8 not supported) |
More information | Please see release notes für BVQ V3.3 |
Notes
- When configuring a topology scanner interval >30 min an adaptation in a GUI configuration file is necessary, concerning the scanner status checks. In this case please contact BVQ support.
- The Excel format generated by the BVQ Reporting is compatible with the Excel version of 2003 and higher. This is the format 'XML spreadsheet 2003' (please see this Microsoft article for more information).The standard file extension for this format is '.xml'. If it is despite saved with '.xls', a warning message appears when it is openend with Excel.
- License changes only take effect after about 2 hours or after restarting the scanner and scheduler.
- Currently not supported VMware functions:
- Partitioned VM SCSI volumes, whose partitions are assigned to multiple VM datastores.
- VM SCSI volumes whose UUIDs are not unique.
Summary: update steps
Update references
- * For an upgrade of BVQ Scanner from version 2.7 to 2.8 or higher should be noted that now a VMware Scanner can exist besides the SVC Scanner. Therefore, it is installed in a new default directory bvq-svc-scanner (previously bvq-scanner). To use the existing scanner configuration again, the update should be proceeded as follows before performing update step 3:
- Stop BVQ Scanner services manually
- Rename directory bvq-scanner in bvq-svc-scanner
- Continue with update step 3.
- Before possibly new functions can be used, a new license file is required.
After the import of the new license the GUI has to be restarted. - The GUI is delivered with new predefined favorites. Only favorites from User favorites are retained.
We recommend to follow the sequence of update steps shown below.
- Preparations
- Checking for correct function of the environment, in particular function of the scanner.
- Manual stop of BVQ Scanner and Alerting-service, Scheduler-services and also of all GUIs and reporting-clients
- Backup of BVQ installation directory and BVQ DB (e.g. DB offline backup with DB2 CMD)
- Starting again the BVQ Scanner
- Update BVQ Install Package Repository:
bvq-package-repository-installer-x64-V3.2.exe
- DB Schema update
- BVQ GUI update
- BVQ Reporting Engine update
- BVQ Report Module update
- BVQ SVC Scanner update
*
- BVQ VMware Scanner update
- BVQ Scheduler update
- BVQ Alerting update
- Performing functional tests
- If necessary inform colleagues about the need to update locally installed BVQ GUI / report clients.
Hinweise
Bitte beachten
Ab Version 3.0 ist der Upgrade von DB2 auf Version 10.5 FP4 zwingend erforderlich.
Bitte laden Sie daher zuerst diese DB2 Version von der IBM Webseite und führen dann den Upgrade durch. Eine Anleitung dazu finden Sie in folgendem Dokument: DB2 Upgrade von Version 9.7 auf 10.5
Ab Version 2.9 wird eine neue Lizenzdatei empfohlen.
Sie können aber auch die alte Lizenzdatei weiterverwenden. In diesem Fall werden neue Features im Lizenz-Dialog als "Missing" angezeigt und sind damit deaktiviert. Ansonsten beeinträchtigt dies die Funktion von BVQ nicht weiter.
Highlights
SVC 7.4 Toleration Support
Neue Funktionen
Issue ID | Modul | Beschreibung |
---|---|---|
BVQ-8450 | Common | SVC 7.4 Toleration Support |
Verbesserungen
Issue ID | Modul | Beschreibung |
---|---|---|
BVQ-8326 | GUI | Performance-Ansicht: Diverse Achsen konsolidieren |
BVQ-8350 | GUI | Docking: Benennung in der Windows Taskleiste klarer gestalten |
BVQ-8445 | GUI | Kontextmenü: Performance-Ansicht: Generelle Reihenfolge nach SVC Layers orientieren |
BVQ-8511 | GUI | DB Connection Profile: Handling durch File Chooser verbessern |
BVQ-8520 | GUI | Performance-Ansicht: Cache Partition: Punkt-Tooltip: Angabe der IO group ergänzen |
Fehlerkorrekturen
Kritische
Issue ID | Modul | Beschreibung |
---|---|---|
BVQ-8603 | SVC Scanner | V7000-300 SAS Ports führen zu Scan-Fehlern - QuickFix: SAS Ports und Performance wird nicht weiter gescannt. Final Fix in 3.3.3 |
BVQ-8493 | SVC Scanner | Topology: Exception mit Firmware Version 7.1.0.2 |
BVQ-8588 | Schema Migration | Fehlschlag bei Mig-Skript 3.3.0.19 |
BVQ-8481 | Schema Migration | Prereq Check für Owner nicht ausreichend |
Wichtige
Issue ID | Modul | Beschreibung |
---|---|---|
BVQ-8607 | GUI | Kontextmenü: VDisk group: Exception beim Aufruf wenn keine VDisks enthalten sind |
BVQ-8566 | GUI | DB/Cluster Auswahldialog: DB Verbindungs-Fehler bei Benutzernamen mit Sonderzeichen |
BVQ-8393 | GUI | DB/Cluster Auswahldialog: Beim Hinzufügen neuer DB Connections kommt es zu einer Fehlermeldung |
BVQ-8409 | GUI | Performance-Ansicht: Node Port: NPE beim Aufruf der Node Port Performance Views einer V3700 |
BVQ-8416 | GUI | Performance-Ansicht: Node to Node: Y-Achse von Data rate beachtet Untergrenze der Skalierung nicht |
BVQ-8431 | GUI | Performance-Ansicht: Favoriten ohne Name führen zur Exception / Manche PerformanceFavoriten haben keinen generierten Namen / Overwrite funktioniert nicht |
BVQ-8441 | GUI | Performance-Ansicht: Options: Objektliste: Default-Sortierung nicht immer nach Primäspalte |
BVQ-8442 | GUI | Performance-Ansicht: Options: Objektliste: Remove von mehreren Objekten in sortierter Tabelle fehlerhaft |
BVQ-8458 | GUI | Performance-Ansicht: Metrik-Reihenfolge beim Zeichnen nicht korrekt bei Node Port BBCZ und auch MDisk |
BVQ-8443 | GUI | Favoriten: Performance-Ansicht: Favoriten für einige Objekttypen werden unerwartet ausgegraut |
Empfohlene
Issue ID | Modul | Beschreibung |
---|---|---|
BVQ-8402 | GUI | Docking: Sobald im Main Window keinen Tab mehr offen ist, lässt sich kein Tab aus bestehenden Undock-Main-Windows heraus in das Main Window ziehen |
BVQ-8403 | GUI | Docking: X-Button: Zieht man einen Tab per D&D aus dem Main Window heraus, so entsteht ein Undock-Main-Window ohne X-Button |
BVQ-8404 | GUI | Docking: X-Button: Sobald im Undock-Main-Windows ein neuer Tab per +-Button erzeugt wird. Nach dem Wechseln des Input-Focus erscheint dieser wieder |
BVQ-8440 | GUI | Performance-Ansicht: Options: Objektliste: Remove eines visible Objektes führt zur Visibility des Obersten |
BVQ-8490 | GUI | Favoriten: Rename Favorite wirkt sich nicht auf den Namen in Add Favorite aus. |
Bekannte Probleme
Issue ID | Modul | Beschreibung |
---|---|---|
IBM PMR 91765,033,724 | SVC 6.2.0.3 | Starke Beeinträchtigung der VDisk Latenz durch den SVC CLI Befehl "lsmdiskextent". Gesehen bei einem Cluster mit 8 Nodes (8G4) unter 6.1.0.4. Ab BVQ 2.4.3 wird dieser Befehl nicht weiter genutzt. Stattdessen wird lsvdiskextent verwendet. |
IBM PMR unbekannt | SVC 6.4.0.3 | Massiv gehäuftes Erreichen des SVC Limits von 10 gleichzeitig konkurrierenden SSH Sessions, kann einen Warmstart der Knoten auslösen. |
BVQ-6610 | BVQ VMware | Multiple Mappings einer VM Virtual Disk (und/oder unterschiedlicher Snapshot-Versionen einer einzelnen) zu einer VM Virtual Machine werden noch nicht unterstützt. Die kommt z.B. bei Flash Copy Managern wie TSM4VE vor. |
BVQ-6623 | BVQ VMware | Scan und Anzeige von Snapshots und deren Kapazitäten werden von BVQ noch nicht unterstützt. Die Used Capacity eine VM Virtual Disk entspricht derzeit der Used Capacity der Original VMDK Datei. |
IBM PMR ? | SVC Performance Stats | Ab Version 6.1.0.1 beziehen sich SLAV, PLAV und DLAV auf die konsolidierten Backend IO sizes bis zu 256k. Nicht aber die IO-Counter für CTRM und CTP, was dazu führt, daß deren Quotient um den Faktor 8 zu niedrig ausfallen kann. Daher können die VDisk below cache Metriken SLAV und PLAV nicht direkt zur Beurteilung der Backend Latencies verwendet werden. Auch deren Transaction size ist nicht die des Backends (max 32k). CTD hingegen wurde auf die konsolidierten IO sizes angepasst und liefert weiterhin brauchbare Werte. |
IBM PMR ? | SVC 7.3 Performance Stats | Legacy VDisk cache statistics corrupted |
IBM PMR ? | SVC 7.3 Performance Stats | Node CPU Core stats =0 |
IBM Defect 197194 | SVC 7.3 Performance Stats | CPT, OPT, APT much too high |
BVQ-8602 | GUI | Nodes der Modelle V7000-100, V7000-300, V3700 werden nicht korrekt differenziert aufgrund des gleichen Node Type 300 - Fix erwartet in BVQ V3.4 |
BVQ-8589 | SVC Scanner | Bei V7000-300 Systemen haben FC- und SAS-Ports die gleiche WWPN. Primary Key verletzt. Daher wurden SAS Ports komplett aus BVQ 3.3.2 entfernt. Fix erwartet in BVQ V3.3.3 |
DB Schema Änderungen
Version | Tabellen | Beschreibung |
---|---|---|
3.3.0.19 | PERF_SVC_NODE_PORT | Migsript auch für V5000 Ports angepasst |
Voraussetzungen und Einschränkungen
Voraussetzungen der HW/SW Umgebung | |
---|---|
Für eine Aktualisierung erforderliche BVQ Mindest-Version | V2.7 |
DB2 Version | DB2 Express V10.5 FP5 |
Java Runtime Mindest-Version | 1.7.0.71 (Java 1.8 not supported) |
Weitere Hinweise |
Anmerkungen
- Bei Konfiguration eines Topologie Scanner Intervalls >30min ist eine Anpassung in einer GUI Konfigurationsdatei, bezüglich der Scanner Status Checks, notwendig. Bitte in diesem Fall beim BVQ Support zurückfragen.
- Das vom BVQ Reporting erzeugte Excel-Format ist kompatibel mit Excel ab Version 2003.
Es handelt sich um das Format "XML Kalkulationstabelle 2003" (siehe Microsoft Artikel ).
Die Standard Dateiendung für dieses Format ist: ".xml". Wird es trotzdem mit ".xls" abgespeichert, kommt es zu einer Warnmeldung beim Öffnen mit Excel. - Lizenzänderungen werden erst nach ca. 2h oder nach Neustart im Scanner und Scheduler wirksam.
- Derzeit nicht unterstützte VMware Funktionen:
- Partitionierte VM SCSI Volumes, deren Partitionen mehreren VM Datastores zugeordnet sind
- VM SCSI Volumes deren UUIDs nicht eindeutig sind.
Kurzbeschreibung: Aktualisierungsschritte
Hinweis zum Upgrade
- * beim Upgrade des BVQ Scanners von Version 2.7 auf 2.8 oder höher ist zu beachten, dass es neben dem SVC Scanner nun auch einen VMware Scanner geben kann. Deshalb wird er in ein neues Standard-Verzeichnis bvq-svc-scanner (vorher bvq-scanner) installiert. Um die vorhandene Scanner-Konfiguration wieder zu verwenden, sollte vor Durchführung des Aktualisierungsschritts 3. wie folgt vorgegangen werden:
- BVQ Scanner Services manuell stoppen
- Verzeichnis bvq-scanner umbenennen in bvq-svc-scanner
- Mit Aktualisierungsschritts 3. fortfahren.
- Um ggf. neue Funktionen nutzen zu können ist eine neue Lizenzdatei notwendig.
Nach dem einspielen der neuen Lizenz ist ein GUI Neustart erforderlich. - Die GUI wird mit neuen Predefined favorites ausgeliefert. Nur Favoriten unter User favorites bleiben erhalten.
Wir empfehlen die unten angegebene Reihenfolge der Aktualisierungsschritte einzuhalten.
- Vorbereitungen
- Prüfung auf korrekte Funktion der Umgebung, insbesondere des Scanners.
- BVQ Scanner-, Alerting-Service, Scheduler-Services und alle GUIs, Reporting-Clients manuell stoppen
- BVQ Installation-Verzeichnis und BVQ DB sichern (z.B. DB Offline Backup mit DB2 CMD)
- BVQ Scanner wieder Starten
- BVQ Install Package Repository aktualisieren:
bvq-package-repository-installer-x64-V3.3.2.exe
- DB Schema aktualisieren
- BVQ GUI aktualisieren
- BVQ Reporting Engine aktualisieren
- BVQ Report Module aktualisieren
- BVQ SVC Scanner aktualisieren
*
- BVQ VMware Scanner aktualisieren
- BVQ Scheduler aktualisieren
- BVQ Alerting aktualisieren
- Funktionsprüfungen durchführen
- Ggf. Kollegen auf die Notwendigkeit zur Aktualisierung lokal installierter BVQ GUI- / Report-Clients hinweisen.